Проблема: Mac Pro (модели 2006,2012,2013,2020, версии Mac OS X 10.7.5-10.15.2) - при подключении вылетает окно "требуются корпоративные учетные данные" (роутер видится как WPA2-EAP, вместо WPA2-PSK?), из-за этого невозможно подключиться.
Ставлю другие роутеры (Netgear, ASUS...) с WPA2-PSK - Mac Pro подключаются без проблем.
interface WifiMaster0
country-code US
compatibility BGN
channel width 40-below
channel auto-rescan 00:00 interval 1
tx-burst
rekey-interval 3600
beamforming explicit mu-mimo
vht
up
!
interface WifiMaster0/AccessPoint0
rename AccessPoint
description "Wi-Fi access point"
mac access-list type none
security-level private
wps
wps no auto-self-pin
authentication wpa-psk ns3 ***
encryption enable
encryption wpa2
ip dhcp client dns-routes
ip dhcp client name-servers
ssid Home317
wmm
rrm
ft mdid Vf
ft enable
up
!
interface WifiMaster0/AccessPoint1
rename GuestWiFi
description "Guest access point"
mac access-list type none
security-level protected
authentication wpa-psk ns3 ***
encryption enable
encryption wpa2
encryption wpa3
ip dhcp client dns-routes
ip dhcp client name-servers
ssid Home317-Guest
wmm
rrm
ft mdid 1f
ft enable
up
!
interface WifiMaster0/AccessPoint2
mac access-list type none
security-level private
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
interface WifiMaster0/AccessPoint3
mac access-list type none
security-level private
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
interface WifiMaster0/WifiStation0
security-level public
encryption disable
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
interface WifiMaster1
country-code US
compatibility AN+AC
channel width 160
channel auto-rescan 00:00 interval 1
tx-burst
rekey-interval 3600
band-steering
band-steering preference 5
beamforming explicit mu-mimo
up
!
interface WifiMaster1/AccessPoint0
rename AccessPoint_5G
description "5Ghz Wi-Fi access point"
mac access-list type none
security-level private
wps
wps no auto-self-pin
authentication wpa-psk ns3 ***
encryption enable
encryption wpa2
ip dhcp client dns-routes
ip dhcp client name-servers
ssid Home317
wmm
rrm
ft mdid Vf
ft enable
up
!
interface WifiMaster1/AccessPoint1
mac access-list type none
security-level protected
authentication wpa-psk ns3 ***
encryption enable
encryption wpa2
encryption wpa3
ip dhcp client dns-routes
ip dhcp client name-servers
ssid Home317-Guest
wmm
rrm
ft mdid 1f
ft enable
up
!
interface WifiMaster1/AccessPoint2
mac access-list type none
security-level private
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
interface WifiMaster1/AccessPoint3
mac access-list type none
security-level private
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
interface WifiMaster1/WifiStation0
security-level public
encryption disable
ip dhcp client dns-routes
ip dhcp client name-servers
down
!
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
Oleg Nekrylov
Модель: KN-1810/1910
Прошивка: 3.3.2 (релиз)
Компонент: 'WPA Enterprise' не установлен
Тип шифрования: WPA2-PSK
Проблема: Mac Pro (модели 2006,2012,2013,2020, версии Mac OS X 10.7.5-10.15.2) - при подключении вылетает окно "требуются корпоративные учетные данные" (роутер видится как WPA2-EAP, вместо WPA2-PSK?), из-за этого невозможно подключиться.
Ставлю другие роутеры (Netgear, ASUS...) с WPA2-PSK - Mac Pro подключаются без проблем.
interface WifiMaster0 country-code US compatibility BGN channel width 40-below channel auto-rescan 00:00 interval 1 tx-burst rekey-interval 3600 beamforming explicit mu-mimo vht up ! interface WifiMaster0/AccessPoint0 rename AccessPoint description "Wi-Fi access point" mac access-list type none security-level private wps wps no auto-self-pin authentication wpa-psk ns3 *** encryption enable encryption wpa2 ip dhcp client dns-routes ip dhcp client name-servers ssid Home317 wmm rrm ft mdid Vf ft enable up ! interface WifiMaster0/AccessPoint1 rename GuestWiFi description "Guest access point" mac access-list type none security-level protected authentication wpa-psk ns3 *** encryption enable encryption wpa2 encryption wpa3 ip dhcp client dns-routes ip dhcp client name-servers ssid Home317-Guest wmm rrm ft mdid 1f ft enable up ! interface WifiMaster0/AccessPoint2 mac access-list type none security-level private ip dhcp client dns-routes ip dhcp client name-servers down ! interface WifiMaster0/AccessPoint3 mac access-list type none security-level private ip dhcp client dns-routes ip dhcp client name-servers down ! interface WifiMaster0/WifiStation0 security-level public encryption disable ip dhcp client dns-routes ip dhcp client name-servers down ! interface WifiMaster1 country-code US compatibility AN+AC channel width 160 channel auto-rescan 00:00 interval 1 tx-burst rekey-interval 3600 band-steering band-steering preference 5 beamforming explicit mu-mimo up ! interface WifiMaster1/AccessPoint0 rename AccessPoint_5G description "5Ghz Wi-Fi access point" mac access-list type none security-level private wps wps no auto-self-pin authentication wpa-psk ns3 *** encryption enable encryption wpa2 ip dhcp client dns-routes ip dhcp client name-servers ssid Home317 wmm rrm ft mdid Vf ft enable up ! interface WifiMaster1/AccessPoint1 mac access-list type none security-level protected authentication wpa-psk ns3 *** encryption enable encryption wpa2 encryption wpa3 ip dhcp client dns-routes ip dhcp client name-servers ssid Home317-Guest wmm rrm ft mdid 1f ft enable up ! interface WifiMaster1/AccessPoint2 mac access-list type none security-level private ip dhcp client dns-routes ip dhcp client name-servers down ! interface WifiMaster1/AccessPoint3 mac access-list type none security-level private ip dhcp client dns-routes ip dhcp client name-servers down ! interface WifiMaster1/WifiStation0 security-level public encryption disable ip dhcp client dns-routes ip dhcp client name-servers down !
Edited by Oleg Nekrylov7 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.