OPKG on Speedster

[KYTECHNGAMING]

Hello,

I didn't have time to ask for a long time.
OPKG component can be installed in SpeedSter. But it doesn't appear in the menu.
How can OPKG be used in Speedster? Is it installed on internal memory? But there is no menu. In the articles about OPKG, SpeedSter does not appear among the devices that support OPKG.

My Speedster is in repeater mode. OPKG can be used in this mode. It is also installed on my KN-1710 device.

Could this be a mistake?

https://ibb.co/qypzVtP
https://ibb.co/Y75Tn53

Speedster / show version

show version

{
    "release": "3.08.B.1.0-3",
    "sandbox": "draft",
    "title": "3.8 Beta 1",
    "arch": "mips",
    "ndm": {
        "exact": "0-ddd9afb",
        "cdate": "14 Apr 2022"
    },
    "bsp": {
        "exact": "0-61b19f301",
        "cdate": "15 Apr 2022"
    },
    "ndw": {
        "version": "3.8.110.2",
        "features": "wifi_button,wifi5ghz,led_control,mimo5ghz,atf5ghz,dual_image,wifi_ft,wpa3,hwnat",
        "components": "base,cloudcontrol,corewireless,dhcpd,dns-filter,dns-https,dns-tls,dot1x,easyconfig,igmp,lang-en,lang-ru,lang-tr,miniupnpd,mws,nathelper-ftp,nathelper-pptp,nathelper-sip,ndmp,ndns,nextdns,opkg,pingcheck,ppe,pppoe,trafficcontrol"
    },
    "ndw3": {
        "version": "1.35"
    },
    "manufacturer": "Keenetic Ltd.",
    "vendor": "Keenetic",
    "series": "KN",
    "model": "Speedster (KN-3010)",
    "hw_version": "10308000",
    "hw_type": "router",
    "hw_id": "KN-3010",
    "device": "Speedster",
    "region": "EU",
    "description": "4️⃣ Speedster",
    "prompt": "(config)"
}

 

Extra / show version

show version

{
    "release": "3.08.B.1.0-3",
    "sandbox": "draft",
    "title": "3.8 Beta 1",
    "arch": "mips",
    "ndm": {
        "exact": "0-ddd9afb",
        "cdate": "14 Apr 2022"
    },
    "bsp": {
        "exact": "0-61b19f301",
        "cdate": "15 Apr 2022"
    },
    "ndw": {
        "version": "3.8.110.2",
        "features": "wifi_button,single_usb_port,led_control,wifi5ghz,dual_image,wifi_ft,wpa3",
        "components": "acl,base,cloudcontrol,config-ap,config-client,config-repeater,corewireless,ddns,dhcpd,dlna,dns-filter,dns-https,dns-tls,dot1x,easyconfig,exfat,ext,fat,ftp,hfsplus,igmp,lang-en,lang-ru,lang-tr,miniupnpd,mws,nathelper-esp,nathelper-ftp,nathelper-h323,nathelper-pptp,nathelper-rtsp,nathelper-sip,ndmp,ndns,nextdns,ntfs,opkg,opkg-kmod-fs,pingcheck,ppe,pppoe,sftp,ssh,storage,trafficcontrol,transmission,tsmb,usb,usbnet,usbnet-extra,webdav"
    },
    "manufacturer": "Keenetic Ltd.",
    "vendor": "Keenetic",
    "series": "KN",
    "model": "Extra (KN-1710)",
    "hw_version": "10178000",
    "hw_type": "router",
    "hw_id": "KN-1710",
    "device": "Extra",
    "region": "TR",
    "description": "2️⃣ Extra",
    "prompt": "(config)"
}

Thank you for all the support, comments and information.

 

The ticket has been opened. #585580

Изменено 16 мая, 2022 пользователем KYTECHNGAMING

[KYTECHNGAMING]

{ "release": "3.08.B.1.0-3", "sandbox": "draft", "title": "3.8 Beta 1", "arch": "mips", "ndm": { "exact": "0-ddd9afb", "cdate": "14 Apr 2022" }, "bsp": { "exact": "0-61b19f301", "cdate": "15 Apr 2022" }, "ndw": { "version": "3.8.110.2", "features": "wifi_button,wifi5ghz,led_control,mimo5ghz,atf5ghz,dual_image,wifi_ft,wpa3,hwnat", "components": "base,cloudcontrol,corewireless,dhcpd,dns-https,dns-tls,dot1x,easyconfig,igmp,l2tp,lang-en,lang-tr,lang-uk,miniupnpd,mws,nathelper-ftp,nathelper-h323,nathelper-pptp,nathelper-rtsp,nathelper-sip,ndmp,ndns,ntce,opkg,opkg-kmod-tc,pingcheck,ppe,pppoe,pptp,trafficcontrol,wireguard" }, "ndw3": { "version": "1.35" }, "manufacturer": "Keenetic Ltd.", "vendor": "Keenetic", "series": "KN", "model": "Speedster (KN-3010)", "hw_version": "10308000", "hw_type": "router", "hw_id": "KN-3010", "device": "Speedster", "region": "TR", "description": "Keenetic Speedster (KN-3010)", "prompt": "(config)" }

this is my friend's speedster running in router mode.

[Mc.Sim]

Hey team,

Same question. 

Any updates?

[mephit]

Hi. Any updates?

[Александр Рыжов]

You can use OPKG component with SDK, if necessary. 

Thats the only way to use addition packages on non-USB models.