GPON SFP-модуль и Ростелеком / МГТС

[gantelay]

31 минуту назад, Ричард Санчез сказал:

@gantelay есть другие варианты, но они дороже и найти их тяжелее. хочешь именно сфп-это оптимальный (и почти единственный) вариант на данный момент. хочешь подешевле - купи на авито любой оптический терминал ростелекома за 500 рублей и поменяй на нём серийный номер.

p.s. не отвечай какими-то непонятными несуществующими цитатами. либо собеседника цитируй либо не цитируй ничего.

Не. Я не хочу их терминалом пользоваться. Лучше пусть будет sfp модуль. А можно ссылку в личку на радиаторы для него?

[gantelay]

Вот вро де еще про этот писали. Его на али можно сейчас со скидкой за 3954, но доставка 319 рублей.

[Ричард Санчез]

11 минуту назад, gantelay сказал:

радиаторы для него

а я понятия не имею какие у него габариты. ширина стандартная, 13.7мм, а вот высоту поспрашивай у людей в этой теме, которые его купили уже.  

3 минуты назад, gantelay сказал:

Вот вро де еще про этот писали

это то же самое.

Изменено 27 января, 2022 пользователем Ричард Санчез

[gantelay]

А этот тоже самое? Вроде по описанию да. Этот продавец вообще за 3700 отдает. Может конечно  не от продавца скидка, в корзине лежит 4300, а когда нажимаю оплатить, сумма оплаты  3700. Буду заказывать тут тогда

[Saph1s]

Хочу заказать данный модуль. Сейчас стоит RT-GM-3 в режиме моста. Можно ли будет перевести этот модуль в режим Bridge?

[Maxsim “Crazy Maxs”]

В 30.01.2022 в 21:52, Saph1s сказал:

Хочу заказать данный модуль. Сейчас стоит RT-GM-3 в режиме моста. Можно ли будет перевести этот модуль в режим Bridge?

Не советую данного продавца. Долго ждал пока отправит. Неделю не отправлял. В итоге я отменил заказ.

[Saph1s]

19 часов назад, Maxsim “Crazy Maxs” сказал:

Не советую данного продавца. Долго ждал пока отправит. Неделю не отправлял. В итоге я отменил заказ.

Меня не интересует скорость отправки, я готов подождать(учитывая то, что в китае сейчас вроде праздничные дни), если в нем есть тот функционал, о котором я писал ранее.

[KYTECHNGAMING]

On 11/5/2021 at 6:59 PM, alexich said:

3) для настройки использовал Медиаконвертор длинк. Модуль поднялся только когда вставил оптику в него

Is it need to connect optical for web gui? ( I guess I misunderstood. )

On 1/2/2022 at 7:05 AM, Pavel Grechishkin said:

Try to save the kinetics configuration (startup-config), reset the kinetics to factory settings, and after that change the address, connect the SFP ONU,  and try to enter the web face. For example, it was impossible for me to enter the web face if the VLAN ID INTERNET values were set in the router settings.

My new SFP GPON is received today. I have Tp-Link media converter. Previously, I tried another GPON ONU which is same chipset with ODI. There is no issue for controlling SFP's.

I set DHCP address for SFP. But I can not reach WEB GUI. (+ SFP is too hot even though fo is not connected)

 

Изменено 1 февраля, 2022 пользователем KYTECHNGAMING

[Pavel Grechishkin]

18 часов назад, KYTECHNGAMING сказал:

Is it need to connect optical for web gui? ( I guess I misunderstood. )

My new SFP GPON is received today. I have Tp-Link media converter. Previously, I tried another GPON ONU which is same chipset with ODI. There is no issue for controlling SFP's.

I set DHCP address for SFP. But I can not reach WEB GUI. (+ SFP is too hot even though fo is not connected)

 

Hot is its normal state. Try to go to the WEB with the provider's optical cable connected.

Изменено 2 февраля, 2022 пользователем Pavel Grechishkin

[KYTECHNGAMING]

24 minutes ago, Pavel Grechishkin said:

Hot is its normal state. Try to go to the WEB with the provider's optical cable connected.

Really? Is it need to connect FO cable? Interesting. 

I have CarlitoxxPro's GPON ONU which is same chipset. Really cold working state and I can reach it's web guio without FO cable. 

[Pavel Grechishkin]

55 минут назад, KYTECHNGAMING сказал:

Really? Is it need to connect FO cable? Interesting. 

I have CarlitoxxPro's GPON ONU which is same chipset. Really cold working state and I can reach it's web guio without FO cable. 

I advise you to try with an optical cable. The problem was discussed. It is impossible to access the WEB without a cable. And this SFP ONU has a very hot working condition. But it works stably. You can advise to glue the radiators.For example, these.

[Pavel Grechishkin]

13 минуты назад, Pavel Grechishkin сказал:

 But it works stably. 

Uptime 3+ days after reboot on my command. Works for me without additional cooling.

Изменено 2 февраля, 2022 пользователем Pavel Grechishkin

[KYTECHNGAMING]

3 hours ago, Pavel Grechishkin said:

I advise you to try with an optical cable. The problem was discussed. It is impossible to access the WEB without a cable. And this SFP ONU has a very hot working condition. But it works stably. You can advise to glue the radiators.For example, these.

Both of aluminium and copper heatsinks are ready for it. https://prnt.sc/26nkp6f

My other GPON doesn't need them.

I missed what was written. Why does the FO cable need to be plugged in? Interesting. Is it because this module has different operating modes, bridge and wan?

Изменено 2 февраля, 2022 пользователем KYTECHNGAMING

[Pavel Grechishkin]

don't expect strong cooling from radiators. the temperature will drop by 5-8 degrees Celsius.
I don't know the reasons. But web is not available without optical cable on this sfp onu.

Изменено 3 февраля, 2022 пользователем Pavel Grechishkin

[KYTECHNGAMING]

3 hours ago, Pavel Grechishkin said:

don't expect strong cooling from radiators. the temperature will drop by 5-8 degrees Celsius.
I don't know the reasons. But web is not available without optical cable on this sfp onu.

I opened a dispute.

The seller also said onu works behind the olt. (When you say that you can reach it with the FO cable attached; I thought the interface would come. already interesting. My other onu is directly accessing the interface. very similar chipset and software available.) 

He said to set the ip settings. pc 192.168.1.10 web 192.168.1.1 ....
Conclusion; likewise it doesn't get ip and has no web interface.

https://streamable.com/16bq6z

 

He also sent this video as a dispute message. Just link up.

https://streamable.com/rsu5il

 

Any advise ?

Изменено 3 февраля, 2022 пользователем KYTECHNGAMING

[KYTECHNGAMING]

I know this friend is among us. He says it can be installed without the FO cable connected. (if there is no translation error)

https://prnt.sc/26npi5p

https://prnt.sc/26npkf0

Изменено 3 февраля, 2022 пользователем KYTECHNGAMING

[KYTECHNGAMING]

Do i have a mistake?

@Pavel Grechishkin

Google Drive - Video Record

I have sent a video to the Chinese seller before. I showed you what I've done. Gateway 192.168.1.1 was written in the ip addresses. He gave me this answer. "no need to write gateway address"

https://prnt.sc/26p4yld 🙃

 

Изменено 5 февраля, 2022 пользователем KYTECHNGAMING

[McMCC]

1 час назад, KYTECHNGAMING сказал:

Do i have a mistake?

Yes! It's not xPON connection, it's simple ethernet to optical conversion. In your SFP no need web interface and set ip address, it should work as simple media convertor. If you really GPON SFP module, then you need to connect to the OLT, not to the media converter.

[KYTECHNGAMING]

10 hours ago, McMCC said:

Yes! It's not xPON connection, it's simple ethernet to optical conversion. In your SFP no need web interface and set ip address, it should work as simple media convertor. If you really GPON SFP module, then you need to connect to the OLT, not to the media converter.

Under this title, many people ordered the same module from the same seller. Whose i remember is @biman @Pavel Grechishkin @alexich @taravasya 

Ordered SFP GPON ONU with MAC-inside https://tr.aliexpress.com/item/4000086970977.html?gatewayAdapt=glo2tur&spm=a2g0o.9042311.0.0.47a64c4d3YpLTW

This device has Realtek chip. RTL9601

Also, I ordered it after seeing that this device has an interface in 2 more forums I read. Some can access their interfaces with the FO cable plugged in, some unplugged. Also how did they change serial number and ploam?

Link1  Link2 Link3

 

I have another gpon with this same chip. With the media converter, I can access its own interface and even be 05 (operational state). I just can't get an IP. I ordered it just because I saw that the module I ordered can also act as a router.

 

 

[KYTECHNGAMING]

comment of the person who can operate and set it through the media converter. https://prnt.sc/26pd4es

[KYTECHNGAMING]

it's all my fault. I could not insert the module correctly into the sfp port. 😁🙈

https://prnt.sc/26pdebk

[McMCC]

20 часов назад, KYTECHNGAMING сказал:

comment of the person who can operate and set it through the media converter. https://prnt.sc/26pd4es

He was using tp-link media converter for SFP GPON module, not for connection with other ONU...

[KYTECHNGAMING]

13 hours ago, McMCC said:

He was using tp-link media converter for SFP GPON module, not for connection with other ONU...

Same for me too. I'm not trying to connect it to another ONU. Is there a misunderstanding? 

I am trying to terminate my fiber line in GPOn module. 05 becomes operational state. I can't be online even though I do the vlan values. That's my only issue. 

[biman]

Более месяца без перезагрузки))))) 

[Durdoom]

Друзья. В итоге для терминалов Ростелеком какой модуль надо брать?

[Maxsim “Crazy Maxs”]

12 часа назад, Durdoom сказал:

Друзья. В итоге для терминалов Ростелеком какой модуль надо брать?

Выше ссылки были.

[Максим Одобеско]

15 часов назад, biman сказал:

Более месяца без перезагрузки))))) 

4 месяца - полет стабильный. Кстати, ни кто не знает где нарыть прошивку? У многих она отличается, а где достать - хз

 

[KYTECHNGAMING]

And I hope I'll find out why I can't get an IP. two different gpon it, both 05 state. But I can't get the IP. PPPOED not discovered.  

[Maxsim “Crazy Maxs”]

не могу понять где взять мне нужны параметры для SFP модуля? 

[mrkuk]

2 часа назад, Maxsim “Crazy Maxs” сказал:

не могу понять где взять мне нужны параметры для SFP модуля? 

для ростелекома серийника достаточно ,который вы зачеркнули