KYTECHNGAMING

20:20 reboot again. But I guess tcpdump did not work. I could not reach any output. Just log. https://prnt.sc/9GwzfYBkZW_F

tcpdump installed. I started the command as follows. https://prnt.sc/XmgjzXZOa7nk The .pcap file was created on disk, but its content is empty. Is he listening now? Isn't it this way?

In the previous message, I showed that the 1st camera was stuck in the past date and time.. @sergeyk I set the sync to "Live" to see if we can trigger the issue. At 13:20 the syslog record was captured. Router restarted. (Also, no recording has been transferred to my disk.) https://prnt.sc/Mng0ahPTdf-a Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: crit Tag: kernel Message: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 9ac62b40, ra == 9ac523c0 Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: warning Tag: kernel Message: Oops[#1]: Time: Mar 15 13:20:00 IP: 10.101.0.1 Host: Keenetic-8178 Facility: kern Priority: warning Tag: kernel Message: CPU: 0 PID: 718 Comm: vfs-ctrl-650e00 Tainted: P O 4.9-ndm-5 #0 Why is the date and time sorting messed up in syslog? log time: https://prnt.sc/h9StW35odgvG https://prnt.sc/le1G9a2n4VW5

It's a really interesting situation. 2 different Mi cameras. They have different synchronous scheduling and write data to the same disk. One of them stopped writing. Could the problem be with the disk? Did the bad sector coincide with the area? It also keeps recording on internal sd-card. 1. camera https://prnt.sc/EyiXkLgQtZ2D 2. camera https://prnt.sc/07BZ-FJVM6MZ

Thanks to you, we got closer to the source of the problem. I didn't set it to sync to this time.But his latest backup seems to be stuck here too. https://prnt.sc/OWUfADL6u5Ba

Hello sergeyk, Yes, I don't have any scheduler. It has been going on for 4 nights. I'm going to open syslog today. According to your findings; At that hour, I think it might just be my Mi camera transferring its backup to disk.

The reboot situation also occurred tonight. https://prnt.sc/aLmCxfMNCS6k

Could it be triggered by the server for the EU variant? In one of the last updates, I was asked to choose a region and I did it. Just a thought.

Hello, I am using KN-1011-EU. The other day, I noticed that the system uptime and WAN IP are different when WG tunnel is not working. I did a check last night. One day after installing 4.0.A.13, the main router would reboot at the same time every night. 03:21 AM There is a reboot action for 3 nights. It was 5:30 AM when I took the self-test last night. Shared privately. Mobile App Events: https://prnt.sc/UdtNjez27gl_ https://prnt.sc/9h6omMLjKT4K https://prnt.sc/1C1yJbbdY9F1 Logs: https://prnt.sc/fDi3BAsl_Hn5 https://prnt.sc/0kVjoZbKXors (SOC power status - not sure if it shows physical or software.)

I hope you will follow the thread I opened earlier. I could not understand the regional differences. @Danya @StanislavP

We received 2-3 similar feedbacks in our Turkish Telegram user group.

Thank you @eralde we Miss dark 4.0

Is it related to that? https://prnt.sc/yOIEuBeUu3po I think this will be your solution https://prnt.sc/Jg89ZW82ZffU https://github.com/Anime4000/RTL960x/blob/main/Docs/Setup_Stick.md

@sips I guess I don't need to test anymore. Because I am already blocked regionally from using the Zyxel Keenetic Plus DSL module on my EU/TR Keenetics. (For this reason, the usb hub and dsl modue I bought was an unnecessary expense.) I seem to have no reason to test for the presence of this symptom. I am sad. Sorry. Thank you for all your help. PS: Maybe I'll have a reason to test it later. Idk!!

I will do it at my first available time and share the files. Thanks.

I am using 3.9.B.2 Developer Version.

@sips Hello again, I need to use usb hub for both Linear and Zyxel Plus DSL. So today I mount simple usb hub. At first, Linear does not start itself again. Steps: Phone Station disabled > Remove Linear from device > New usb hub atteched to Keenetic > Mount Linear to usb hub > Enabled telephone service > https://prnt.sc/uTby-zxhZlyu Same issue again > Turn off / on this switch > Linear Works Log output: Nov 22 17:05:53 ndm Nvox::Manager: Telephonе service disabled. Nov 22 17:05:53 ndm Core::System::StartupConfig: saving (http/rci). Nov 22 17:05:57 ndm Core::System::StartupConfig: configuration saved. Nov 22 17:06:14 kernel usb 1-2: USB disconnect, device number 6 Nov 22 17:06:14 ndm Nvox::Manager: Keenetic Linear removed. Nov 22 17:06:28 kernel usb 1-2: new high-speed USB device number 7 using xhci-mtk Nov 22 17:06:28 kernel usb 1-2: New USB device found, idVendor=214b, idProduct=7250 Nov 22 17:06:28 kernel usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Nov 22 17:06:28 kernel usb 1-2: Product: USB2.0 HUB Nov 22 17:06:28 kernel hub 1-2:1.0: USB hub found Nov 22 17:06:28 kernel hub 1-2:1.0: 4 ports detected Nov 22 17:07:11 kernel usb 1-2.4: new full-speed USB device number 8 using xhci-mtk Nov 22 17:07:11 kernel usb 1-2.4: New USB device found, idVendor=31b7, idProduct=0002 Nov 22 17:07:11 kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 22 17:07:11 kernel usb 1-2.4: Product: USB CDC serial port device Nov 22 17:07:11 kernel usb 1-2.4: Manufacturer: Keenetic, Ltd. Nov 22 17:07:11 kernel usb 1-2.4: SerialNumber: S2135NS Nov 22 17:07:11 kernel cdc_acm 1-2.4:1.0: ttyACM0: USB ACM device Nov 22 17:07:11 ndm Nvox::Manager: Keenetic Linear Bootloader added. Nov 22 17:07:12 kernel usb 1-2.4: USB disconnect, device number 8 Nov 22 17:07:12 ndm Nvox::Manager: Keenetic Linear Bootloader removed. Nov 22 17:07:14 kernel usb 1-2.4: new full-speed USB device number 9 using xhci-mtk Nov 22 17:07:14 kernel usb 1-2.4: New USB device found, idVendor=31b7, idProduct=0001 Nov 22 17:07:14 kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 22 17:07:14 kernel usb 1-2.4: Product: Keenetic Linear Nov 22 17:07:14 kernel usb 1-2.4: Manufacturer: Keenetic, Ltd. Nov 22 17:07:14 kernel usb 1-2.4: SerialNumber: S2135NS Nov 22 17:07:14 ndm Nvox::Manager: Keenetic Linear added. Nov 22 17:07:23 ndm Nvox::Manager: Telephonе service enabled. Nov 22 17:07:23 ndm Core::System::StartupConfig: saving (http/rci). Nov 22 17:07:25 kernel usb 1-2.4: USB disconnect, device number 9 Nov 22 17:07:25 ndm Nvox::Manager: Keenetic Linear removed. Nov 22 17:07:25 kernel usb 1-2.4: new full-speed USB device number 10 using xhci-mtk Nov 22 17:07:26 kernel usb 1-2.4: New USB device found, idVendor=31b7, idProduct=0001 Nov 22 17:07:26 kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 22 17:07:26 kernel usb 1-2.4: Product: Keenetic Linear Nov 22 17:07:26 kernel usb 1-2.4: Manufacturer: Keenetic, Ltd. Nov 22 17:07:26 kernel usb 1-2.4: SerialNumber: S2135NS Nov 22 17:07:26 ndm Nvox::Manager: Keenetic Linear added. Nov 22 17:07:26 nvox No USB dongle. Nov 22 17:07:27 ndm Core::System::StartupConfig: configuration saved. Nov 22 17:07:30 ndm Nvox::Manager: system failed [0xcffd04e4], timed out. Nov 22 17:09:14 ndm Nvox::Manager: disabled SIP line "1". Nov 22 17:09:14 ndm Core::System::StartupConfig: saving (http/rci). Nov 22 17:09:18 kernel usb 1-2.4: USB disconnect, device number 10 Nov 22 17:09:18 ndm Nvox::Manager: Keenetic Linear removed. Nov 22 17:09:19 kernel usb 1-2.4: new full-speed USB device number 11 using xhci-mtk Nov 22 17:09:19 ndm Core::System::StartupConfig: configuration saved. Nov 22 17:09:19 kernel usb 1-2.4: New USB device found, idVendor=31b7, idProduct=0001 Nov 22 17:09:19 kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 22 17:09:19 kernel usb 1-2.4: Product: Keenetic Linear Nov 22 17:09:19 kernel usb 1-2.4: Manufacturer: Keenetic, Ltd. Nov 22 17:09:19 kernel usb 1-2.4: SerialNumber: S2135NS Nov 22 17:09:19 ndm Nvox::Manager: Keenetic Linear added. Nov 22 17:09:46 ndm Nvox::Manager: enabled SIP line "1". Nov 22 17:09:46 ndm Core::System::StartupConfig: saving (http/rci). Nov 22 17:09:50 ndm Core::System::StartupConfig: configuration saved. Nov 22 17:09:50 kernel usb 1-2.4: USB disconnect, device number 11 Nov 22 17:09:50 ndm Nvox::Manager: Keenetic Linear removed. Nov 22 17:09:50 kernel usb 1-2.4: new full-speed USB device number 12 using xhci-mtk Nov 22 17:09:50 kernel usb 1-2.4: New USB device found, idVendor=31b7, idProduct=0001 Nov 22 17:09:50 kernel usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 22 17:09:50 kernel usb 1-2.4: Product: Keenetic Linear Nov 22 17:09:50 kernel usb 1-2.4: Manufacturer: Keenetic, Ltd. Nov 22 17:09:50 kernel usb 1-2.4: SerialNumber: S2135NS Nov 22 17:09:50 ndm Nvox::Manager: Keenetic Linear added. Nov 22 17:09:51 ndm Nvox::Manager: system failed [0xcffd04e4], timed out. Nov 22 17:09:53 nvox Line AVENCOM: bulut.avencom.com.tr registration successful: response 200 OK. Nov 22 17:09:53 ndm Nvox::Sip: line "AVENCOM": "bulut.avencom.com.tr" registered.

I observed it at Peak KN-2710. When wifi channels are turned on, the background is different. https://prnt.sc/iDleRCbb5tQm Just as it occurred to me. I guess it has to do with the DFS description field. Because there is no DFS on RU regional devices. https://prnt.sc/kG8d7yGIE_na

Just apply this article. https://help.keenetic.com/hc/ru/articles/4405806688914-Remote-access-to-the-Transmission-interface

3.9.B.1 New Property Text Color https://prnt.sc/aJj-AqSsBkKZ

Is CID turned on? https://prnt.sc/-GoRDNfJpWpS Is component installed? https://prnt.sc/QbKfnwjTGHOP

rmm is back again. 🙏 https://prnt.sc/8NXX_zwGa6wP

https://prnt.sc/pY9GR0EBggQt Some are online and some are offline. I think the migration/update is in progress.

I think understanding is needed. RMM is still in beta and is being made more usable with updates every day. There may be interruptions during this phase. But there is no access problem as you say.

RMM has been gone since last night. https://prnt.sc/8mgwdGncH0FA